Installation Instructions

UniverSeal US-100

Download PDF

UniverSeal US-100 Liquid Tape

Polyether Sealant, Vertical Seam Sealer

Application

  • Surface must be clean & free from dirt, oil & debris
  • Do not apply below 32°F (0°C), due to frost
  • Do not apply the membrane to a substrate that has absorbed water
  • Maintain UniverSeal US-100 at room temperature before applying
  • Tack free in 20 min.
  • Cures to firm rubber seal in 60 min
  • Do not let un-tooled beads stand for more than 10 min
  • May be left exposed for up to 6 months
  • Before applying an air barrier coating, install UniverSeal US-100 Liquid Tape over caps in adjacent wall cladding, sheathing, and insulation board. Do not apply over air barrier coatings or other functional coatings without first testing adhesion.
Free Specification ReviewContact Us
Image
Image
Image
Contact Us
Image
Earn AIA Credits
Image

LinkedIn

Image
Newsletter Sign Up

Specializing in transition membranes and through-wall flashings, York has been inventing and producing flashings since 1935. As the leader in the commercial and residential flashing industry, York has led the charge to create flashings that are compatible with the air barriers and insulations that populate the cavity wall.

    
York Flashings
43 Community Drive, Sanford, ME 04073
T: 800-551-2828 | F: 888-819-2592 | E: [email protected]